CHEVRON ENVIRONMENTAL HEALTH CENTER -- PRO-GARD FUEL INJECTOR CLEANER -- 6850-00D006321
===================== Product Identification ===================== Product ID:PRO-GARD FUEL INJECTOR CLEANER MSDS Date:02/24/1990 FSC:6850 NIIN:00D006321 === Responsible Party === Company Name:CHEVRON ENVIRONMENTAL HEALTH CENTER Address:15299 SAN PABLO AVE. Box:4054 City:RICHMOND State:CA ZIP:94804-0054 Country:US Info Phone Num:415-842-5550 Emergency Phone Num:800-457-2022 CAGE:0AHD1 === Contractor Identification === Company Name:CHEVRON ENVIRONMENTAL HEALTH CENTER INC Address:15299 SAN PABLO AVE Box:4054 City:RICHMOND State:CA ZIP:94804 Country:US Phone:800-582-3835 CAGE:0AHD1 ============= Composition/Information on Ingredients ============= Ingred Name:POLYETHER AMINE IN INGRED #2. Other REC Limits:NONE RECOMMENDED Ingred Name:NAPHTHA, LIGHT AROMATIC (SOLVENT NAPHTHA) CAS:64742-95-6 RTECS #:WF3400000 Other REC Limits:NONE RECOMMENDED Ingred Name:1,2,4-TRIMETHYLBENZENE (SARA 313) CAS:95-63-6 RTECS #:DC3325000 Fraction by Wt: 3.0% Other REC Limits:NONE RECOMMENDED OSHA PEL:25 PPM ACGIH TLV:25 PPM; 9596 Ingred Name:XYLENES (O-,M-,P- ISOMERS) (SARA 313) (CERCLA) CAS:1330-20-7 RTECS #:ZE2100000 Fraction by Wt: <2.0% Other REC Limits:NONE RECOMMENDED OSHA PEL:100 PPM ACGIH TLV:100 PPM/150STEL;9596 EPA Rpt Qty:1000 LBS DOT Rpt Qty:1000 LBS Ingred Name:MESITYLENE (TRIMETHYLBENZENES) CAS:108-67-8 RTECS #:OX6825000 Fraction by Wt: <2.0% Other REC Limits:NONE RECOMMENDED ===================== Hazards Identification ===================== LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER. Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO Health Hazards Acute and Chronic:EYE:SLIGHT IRRIT,PROL IMPAIRMENT OF VISION.DEGREE OF INJURY DEPEND ON AMT OF MATL/SPEED OF 1STAID.SKIN:SEVERE IRRIT,PROL INJURY.DEGREE OF INJURY DEPEND ON AMT OF MATL/SPEED 1STAID.SKIN:PRACTICALLY NON -TOXIC TO INTERN ORG.INHAL:PROL INHAL CNS EFFECTS.INGEST:SLIGHTLY TOXIC TO INTERN ORG.ASPIRATION HAZ,SEVERE LUNG(SUPPLE) Effects of Overexposure:EYE:PAIN,TEARS,SWELLING,REDNESS,BLURRED VISION.SKIN:PAIN,FEELING OF HEAT,DISCOLORATION,SWELLING,BLISTERING.INHAL:CNS EFFECTS-HEAD,DIZZ,LOSS OF APPETITE,WEAK,LOSS OF COORDINATION.INGEST:Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER. ======================= First Aid Measures ======================= First Aid:EYE:FLUSH IMMED W/WATER FOR @LEAST 15MINS OPENING EYELIDS.REMOVE CONTACT LENSES IF WORN.IRRIT PERSISTS SEE DR.SKIN;REMOVE CONTAMIN CLOTH.WASH WELL W/SOAP/WATER.SIGNS/SYMPT OCCUR SEE DR.INHAL:SIGNS/SYM PT OCCUR MOVE TO FRESH AIR.EFFECTS CONTSEE DR.INGEST:GIVE WATER/MILK TO DRINK.CALL FOR MED ADVICE.DON'T INDUCE VOMIT UNLESS DIRECTED BY MED PERSON.TAKE TO MED EMERG TREAT CNTR W/PROD CNTNR(SUPPLEMEN) ===================== Fire Fighting Measures ===================== Flash Point Method:TCC Flash Point:100F,38C Autoignition Temp:Autoignition Temp Text:660F Lower Limits:NO DATA AVAI Upper Limits:NO DATA AVAI Extinguishing Media:CO2, DRY CHEMICAL, FOAM, WATER FOG. Fire Fighting Procedures:FIRE INVOLVING MATL DO NOT ENTER ANY ENCLOSED/CONFINED FIRE SPACE W/O PROPER PROTECTIVE EQPMT INCLUDING SELF-CONTAINED BREATHING APPARATUS. Unusual Fire/Explosion Hazard:LIQ EVAPORATES/FORMS VAP(FUMES)WHICH CAN CATCH FIRE/BURN W/EXPLO VIOLENCE.INVISIBLE VAP SPREADS EASILY-CAN BE SET ON FIRE BY IGN SOURCES.FIRE HAZ >LIQ TEMP(SUP) ================== Accidental Release Measures ================== Spill Release Procedures:MATL MAY BE TOXIC TO AQUATIC ORGANISMS,SHOULD BE KEPT OUT OF SEWAGE/DRAINAGE SYS/BODIES OF WATER.STUDY AIR POLLUTION REGS.ELIMINATE ALL OPN FLAM.STOP LEAD/SPILL.CLEANUP ASAP,USE PPE.CONTAIN LIQ-PREVEN T CONTAM SOIL/WATER.FOLLOW REPORTING PROCEDURES. Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER. ====================== Handling and Storage ====================== Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER. Other Precautions:USE ONLY IN WELL VENTIL AREA.KEEP CNTNR CLSD.REPLACE CAP/BUNG.EMPTIED CNTNR STILL CONTAINS HAZ/EXPLO VAP/LIQ.READ/OBSERVE ALL PRECAUTIONS ON PRODUCT LABEL.READ ENTIRE DOC/LABEL BEF USING PROD. ============= Exposure Controls/Personal Protection ============= Respiratory Protection:MATL MAY BE INHAL HAZ & UNLESS VENTILATION IS ADEQUATE THE USE OF APPROVED RESPIRATORY PROTECTION IS RECOMMENDED. Ventilation:USE THIS MATL ONLY IN WELL VENTILATED AREAS. Protective Gloves:PROTECTIVE GLOVES. Eye Protection:CHEMICAL GOGGLES. Other Protective Equipment:PROTECTIVE CLOTHING. Work Hygienic Practices:DISCARD CONTAMIN NON-WATERPROOF SHOES/BOOTS.WASH CONTAMIN CLOTH.DON'T GET IN EYES/SKIN/CLOTH. Supplemental Safety and Health FIRE/EXPLO HAZ:RISES >85F. HEALTH HAZ:INJURY,DEATH. 1STAID:DR:INGEST/VOMIT CAN RESULT IN ASPIRATION OF LIGHT HYDROCARBON LIQ-CAN CAUSE PNEUMONITIS. ================== Physical/Chemical Properties ================== HCC:F4 Boiling Pt:B.P. Text:N/DATA AVAI Melt/Freeze Pt:M.P/F.P Text:NA Decomp Temp:Decomp Text:NP Vapor Pres:0.59PSI Vapor Density:NDA Spec Gravity:0.82 pH:NP Viscosity:1.6CST @40C Evaporation Rate & Reference:NO DATA AVAILABLE. Solubility in Water:INSOLUBLE. Appearance and Odor:CLEAR COLORLESS TO PALE YELLOW LIQUID. Percent Volatiles by Volume:NDN Corrosion Rate:NP ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES MAY REACT W/STRONG OXIDIZIGN AGENTS SUCH AS CHLORATE,NITRATES,PEROXIDES,ETC. Stability Condition to Avoid:DON'T USE/STORE NEAR FLAM/SPARK/HOT SURF.DON'T WELD/HEAT/DRILL CNTNR.CAUT:DON'T USE PRESSURE TO EMPTY DR-EXPLO MAY RESUL Hazardous Decomposition Products:NA.COMBUST PROD:NORMAL COMBUST FORMS CO2,WATER VAP,MAY PRODUCE OXIDES OF NITROGEN.INCOMPLETE COMBUST CAN PRODUCE CO. ==================== Disposal Considerations ==================== Waste Disposal Methods:PLACE CONTAM MATLS IN DISPO CNTNRS/DISPO IN MANNER CONSISTENT W/APPLICABLE REGS.CONTACT LOC ENVIRO/HEALTH AUTHORITIES FOR APPROVED DISPO OF MATL.CONTAIN CHEMS SUBJ TO REPORTING REQMTS SEC 313 TITLE II I SARA/40CFR372. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.